Filter
Top Products
B
22
Operating Instructions
Spin speed
The maximum displayed spin speed depends on the selected
programme.
Press button until the required spin speed.
If setting --- (without final spin) has been selected, the
washing remains in the final rinsing water.
Before the laundry can be unloaded, the Empty or Spin
program must be performed. Or pressing button to
select the desired spin speed.
The spin speed can be changed at any time by pressing
the button until the desired speed is displayed.
Setting --- (without final spin) is possible until the
Rinse programme section starts.
Start time
Before a programme start, you can specify by how many
hours the start of the programme is to be delayed.
Press the button, appears in the display.
Press the button until the desired number of hours is
displayed.
The start time can be set in 1-hour steps. The time can be
delayed up to a maximum of . If a start time of
has been set , the programme duration time can be
accessed by pressing the button again.
The first line of the programme flashed between and .
The time delay is counted down by the hour. When the
start time has elapsed, the programme starts automatically
and the programme duration is displayed.
Changes to the start time or an immediate start are
possible. To do This:
Briefly set the programme selector to another program.
Press the Start time. The programme starts.
When the programme selector has been reset to the
original programme, individual or all other settings may
have to be re-selected. If required, reset the start time.
,,
,,
,,
,,
,,
,,