Filter
Top Products
25
Loading the laundry
9 WARNING
RISK OF EXPLOSION
Do not dry the laundry that has ever been in contact
with solvents, oil, wax, grease or paint (e.g. hair
styling products, nail varnish remover, stain
remover, cleaning solvent, etc.).
1.
Check lint filter.
The filter should be cleaned after or before every
drying process. Cleaning the filter reduces the drying
time and saves energy.
~ Cleaning the lint filter; Page 27
2.
Load the laundry into the drum and close the door.
Tip: If the door has not been closed properly, the dryer
will not start.
Tips
After loading, close the door carefully so as not to trap
any items between the door and the rubber seal. The
door should close until a click is heard.
Foreign objects left in the drum may damage laundry.
Before inserting any laundry, check to make sure no
foreign objects are in the drum.
Recommended Load Size
Recommended maximum load size can be found in the
program selection table in this manual.
~ Program selection table; Page 20
Load the laundry
Place laundry in the empty drum. Put each piece of
laundry into machine separately.
For best results the laundry to be dried must be sorted
according to type of laundry and desired degree of
drying.
~ Program selection table; Page 20
~ Sorting the laundry; Page 19
~ Dry Level; Page 21
Starting the program
1.
Rotate program selector to the desired program.
Select the program which corresponds to the laundry
in the dryer from Program selection table.
~ Program selection table; Page 20
The Start/Pause indicator light starts flashing.
2.
Press the Start/Pause button. Indicator lamp lights up
and the cycle starts.
During the cycle, the display area indicates the
estimated remaining time and, after starting the drying
cycle, the cycle duration and the symbols for the cycle
progress are flashing.
~ Display area; Page 19
NOTICES
▯ If you want to protect the cycle against inadvertent
adjustment, select the Childproof lock.
~ Childproof lock; Page 26
▯ If Cleaning req. indicator lights up, clean the lint
filter and/or heat exchanger.
~ Cleaning the lint filter; Page 27
~ Cleaning the heat exchanger; Page 28
L