Filter
Top Products
54
This is necessary if very little or no water flows into the
washing machine.
First release the water pressure in the supply hose:
q Turn off the water tap.
q Turn the programme selector to any programme
(except Spin 4" and Drain").
q Press Start/Pause" button and wait for Water tap
closed?" message.
q Turn the programme selector to Off".
q Disconnect the hose from the water tap.
q Clean filter with a small brush or paint brush.
q Connect the hose.
q Turn on water tap.
q Check whether water is coming out of the end of
the hose.
If water is still discharged, check that the strainer is
attached properly.
Caution
Descaling agents contain acids which can attack
parts of the washing machine and discolour the
laundry.
Provided that you use the correct amount of
detergent, it is not necessary to descale the washing
machine.
If, however, descaling the appliance becomes
necessary, please follow the instructions provided by
the descaling agent manufacturer.
Cleaning water inlet
strainers
Descaling the
washing machine