Filter
Top Products
21
Special features
Auto Load adjust
Auto Load adjust" adjusts the
water and energy consumption for
each program and determines the
amount of laundry and type of
fabrics.
This process is built into your maĆ
chine and occurs automatically.
This control reduces water and
energy consumption when washing
small loads.
A flow sensor measures the water
flow rate and meters the exact
volume of water required for the
load.
This sensor ensures the water level
is correct for washing your laundry
- from our economical Regular/
Cotton" and Permanent Press"
programs to the Delicates", Hand
Wash", Wool", Active Wear" and
Sanitary" cycles.
Unbalanced load detection
system
The automatic unbalanced load
detection system spins the laundry
several times to ensure even
distribution.
If the wash load is unevenly
distributed, it will not spin (for safety
reasons) or the final spin speed is
reduced.
In the wool program the appliance
will attempt to start the spin cycle
only twice in order to prevent
shrinking.
Displayed Time
Due to these and other
characteristics of the controls the
actual cycle time will vary.
When a program has been
selected, the expected cycle time is
displayed.
The following will effect the
displayed time:
- Load size
- Repeated spin attempts to
evenly distributed load
- Additional rinse cycles if
excessive foam occurs
- Water pressure is too low
- Selection of additional options,
e.g. Rinse plus"
i
You may notice these effects
(more or less time) changing
the displayed time when they
occur in the cycle. If no options
are selected and these effects
do not occur, the time
indicated will be time that the
cycle will finish.