Blomberg WMT 8320 S Washer User Manual


 
EN
40
Adjusting the feet
A
In order to ensure that the product
operates more silent and vibration-
free, it must stand level and
balanced on its feet. Balance the
machine by adjusting the feet.
Otherwise, the product may move
from its place and cause crushing
and vibration problems.
1. Loosen the lock nuts on the feet by
hand.
2. Adjust the feet until the product
stands level and balanced.
3. Tighten all lock nuts again by hand.
A
Do not use any tools to loosen the
lock nuts. Otherwise, they will get
damaged.
Electrical connection
Connect the product to a grounded
outlet protected by a fuse complying
with the values in the "Technical
specifications" table. Our company shall
not be liable for any damages that will
arise when the product is used without
grounding in accordance with the local
regulations.
Connection must comply with
national regulations.
Power cable plug must be within
easy reach after installation.
The voltage and allowed fuse or
breaker protection are specified in
the “Technical specifications” section.
If the current value of the fuse or
breaker in the house is less than 16
Amps, have a qualified electrician
install a 16 Amp fuse.
The specified voltage must be equal
to your mains voltage.
Do not make connections via
extension cables or multi-plugs.
B
Damaged power cables must be
replaced by the Authorized Service
Agents.
First use
Before starting to use the product, make
sure that all preparations are made in
accordance with the instructions in
sections "Important safety instructions"
and "Installation".
To prepare the product for washing
laundry, perform first operation in Drum
Cleaning programme. If your machine
is not featured with Drum Cleaning
programme, use Cottons-90 programme
and select Additional Water or Extra
Rinse auxiliary functions as well. Before
starting the programme, put max. 100
g of powder anti-limescale into the