Filter
Top Products
16
EN
Auxiliary functions
Audio Warning
The machine will give an audio warning when the
programme comes to an end. If you do not want the
machine give an audio warning, press the Volume Level
button repeatedly until “x” appears on the display. Use
the same button to adjust the volume level.
C
You can activate this function either before or after
the programme starts.
Cancel
audio warning
Audio warning
level 1
Audio warning
level 2
Audio warning
level 3
Dryness level
Used to adjust the required dryness level. More drying
is performed compared to the default settings when “+”
sign appears and less drying is performed when “-” sign
appears. Programme duration can change depending on
the selection.
C
You can activate this function only before the
programme has started.
Anti-creasing
You can use Anti-creasing function to prevent laundry
from creasing if you will not take the laundry out after
the program has come to an end. This program rotates
the laundry in every 240 second for 2 hours to prevent
creasing.
Anti-creasing is activated but the programme is still
running in the first display image below. Drying cycle is
completed and the Anti-creasing step has started in the
second display image.
C
Press Anti-creasing button to activate this function.
Changing the contrast
Adjust the display contrast in order to make the symbols
on the display appear clearer. It may particularly be
necessary to change the contrast setting of the display
when the dryer is installed over a washing machine.
Press and hold the Spin Speed / Timer Programme
button for 3 seconds.
When the contrast is changed, all symbols on the
display will appear for 3 seconds in order to indicate
that the process is complete.
C
Perform the same procedure to revert back to the
previous contrast setting.
Warning symbols
C
Warning symbols may differ according to the
model of your machine.
Lint filter cleaning
When the programme is completed, a warning symbol
will appear to remind that the filter needs to be cleaned.
C
If the Filter Cleaning symbol flashes continuously,
refer to “Troubleshooting” section.
Water tank
When the programme is completed, a warning symbol
will appear to remind that the water tank needs to be
drained.
If the water tank becomes full while the programme
is running, the warning symbol will start to flash and
machine will pause. Drain the water in the water tank
and press Start / Pause / Cancel button to resume
the programme. The warning symbol turns off and the
programme resumes operating.
Cleaning of filter drawer
Warning symbol flashes with certain intervals to remind
that the filter drawer needs to be cleaned.
Loading door open
This warning symbol appears when the loading door of
the dryer is open.
Time Delay
Time Delay function allows you to delay the startup of
the programme up to 24 hours.
1. Open the loading door and put the laundry in.
2. Select the drying programme, spin speed and, if
required, the auxiliary functions.
3. Press Time Delay buttons + and - to set the
desired time delay. The Time Delay symbol will