16 - EN
result will be wet laundry after the drying
process is over.
C Laundry may be added or taken out
as much as desired during a drying
process, but as this process will interrupt
drying continuously, it will extend
the program duration and increase
energy consumption. Therefore, it is
recommended to add laundry before
the drying program is started.
Child-proof lock
There is a childproof lock to prevent any
program interruption due to the pressing
of keys while the program is on. In order
to activate the childproof lock, press on
the“AudioWarning”and“-”timedelay
buttons simultaneously for 2 seconds. The
“Childprooflock”willbeactivatedanda
warning led will light up.
To start a new program after the program
is over or to interrupt the program, the
childproof lock should be deactivated. To
deactivate the childproof lock, press the
samebuttonsfor2sec.““Childprooflock”
will be deactivated and the warning light
will go off.
Ending the program through
canceling
The program which is selected first will keep
on going even if the position of the program
selection button is changed. A new program
canbeselectedandstartedafter“Program
cancel” is activated in order to change the
drying program.
To cancel any selected program;
• Press“Start/Pause/Cancel”buttonfor
about4seconds.The“Filtercleaning”,
“End/Anti-creasing”warninglightswill
light up at the end of this period for
reminding purposes.
A As the inside of the machine will be
excessively hot when you cancel the
program while the machine is running,
activate the ventilation program to cool it
down.
End of program
The“End/Anti-creasing”lampandthe“Filter
cleaning” warning led on the program follow
up indicator will light up when the program
comes to an end. The door can be opened
and the machine becomes ready for a
second cycle.
Pressthe“On/Off”buttontoshutdownthe
machine.
C A 2-hour anti creasing program to
prevent laundry from creasing will be
activated if you do not take the laundry
out after the program has come to an
end.
C Clean the filter after each drying (please
see, Filter cleaning