Filter
Top Products
How to Use
This appliance is for household use only.
GETTING STARTED
Remove any labels, stickers or tags attached to the body or soleplate of the iron.
Note: Use ordinary tap water for ironing. Do not use water processed through a
home softening system.
Important: For optimum performance, let the iron stand for 90 seconds before
beginning to iron.
IRONING WITH STEAM
Filling Water Tank
1. Open the water-fill cover (A).
2. Tilt the iron and using a clean measuring cup, pour water
into opening until the water reaches the MAX level mark
on the water tank (B). Do not overfill.
3. Close the water-fill cover.
4. Plug in the iron. The temperature-ready light glows (C).
Tip: If unsure of a garment’s fiber, test a small area (on an
inside seam or hem) before ironing.
5. Move the dry/steam selector to the desired steam
level (D).
6. Turn the fabric-select dial to appropriate steam setting
(between 4 and 6) for your fabric (E). Read garment’s label
to help you determine fabric type.
• The temperature-ready light glows until it reaches the
appropriate temperature.
• It then glows on and off during ironing. This is normal.
7. When finished ironing, turn the fabric-select dial to lowest
heat setting, move the dry/steam selector to and
unplug the iron.
4
3
Product may vary slightly from what is illustrated.
1. Spray nozzle
2. Water-fill cover
3. Dry/steam selector
4. Spray button
5. Steam button
6. Temperature-ready and auto shutoff light
7. Comfort Grip™ handle
8. 360° pivoting cord
9. Heel rest
10. Fabric-select dial
11. AUTO CLEAN
®
button
12. Water tank
13. Soleplate
Steam
Spray
Dry
Symbols
ቢ
ባ
ቤ
ብ
ቦ
ቧ
ቨ
ቩ
ቪ
ቫ
ቭ
ቮ
ቯ
k
A
k
B
k
C
k
D
k
E
AS255Pub1000003118 7/25/06 4:25 PM Page 4