Beko WMI 81341 Washer User Manual


 
Washing Machine /User’s Manual
29 / EN
Operating the product
5.13 Starting the programme
1. Press Start / Pause / Cancel button to start the
programme.
2. Start symbol showing the startup of the
programme will turn on.
3. Loading door is locked and Door Locked symbol
appears on the display.
4. The symbol of the step from which the
programme has started appears on the display
(Prewash, Main Wash, Rinse, Softener and
Spin).
5.14 Progress of programme
Progress of a running programme is indicated on
the display with a set of symbols.
Relevant symbol appears on the display at the
beginning of each programme step and all
symbols remain lit at the end of the programme.
The farthermost right symbol indicates the current
programme step.
Prewash
If the Prewash auxiliary function is selected,
Prewash symbol appears on the display indicating
that the prewash step has started.
Main Wash
Main Wash symbol indicating that the main wash
step has started appears on the display.
Rinse
Rinse symbol indicating that the rinsing step has
started appears on the display.
Softener
Softener symbol indicating that the softener step
has started appears on the display.
Spin
Appears at the beginning of the final spin step
and remains lit during Spin and Pump special
programmes.
C
If the machine does not pass to the
spinning step, Rinse Hold function might
be active or the automatic unbalanced
load detection system might be activated
due to the unbalanced distribution of the
laundry in the machine.
5.15 Loading door lock
There is a locking system on the loading door of
the machine that prevents opening of the door in
cases when the water level is unsuitable.
Door Locked symbol appears when the loading
door is locked. This symbol will flash until the
loading door becomes ready to open when
programme completes or the machine is paused.
Do not force to open the loading door in this step.
Symbol disappears when the door is ready to
open. You can open the door when the symbol
disappears.
5.16 Changing the selections
after programme has started
Switching the machine to pause mode
Press the Start / Pause / Cancel button to switch
the machine to pause mode. Pause symbol
appears on the display indicating that the machine
is paused. Start symbol disappears.
F2
F4
F1
F3
Changing the speed and temperature settings
for auxiliary functions
Depending on the step the programme has
reached, you may cancel or activate the auxiliary
functions; see, "Auxiliary function selection".
You may also change the speed and temperature
settings; see, "Spin speed selection" and
"Temperature selection".
Adding or taking out laundry
1. Press the Start / Pause / Cancel button to
switch the machine to pause mode. The
programme follow-up light of the relevant step
during which the machine was switched into
the pause mode will flash.
2. Wait until the Loading Door can be opened.
3. Open the Loading Door and add or take out the
laundry.
4. Close the Loading Door.