Beko WMI 81341 Washer User Manual


 
24 / EN
Washing Machine /User’s Manual
Operating the product
5.7 Special programmes
For specific applications, select any of the
following programmes.
• Rinse
Use this programme when you want to rinse or
starch separately.
• Spin+Drain
Use this programme to apply an additional spin
cycle for your laundry or to drain the water in the
machine.
Before selecting this programme, select the
desired spin speed and press Start / Pause /
Cancel button. The machine will spin the laundry
with the set spin speed and drain the water
coming out of them.
If you wish to drain only the water without
spinning your laundry, select the Pump+Spin
programme and then select the No Spin function
with the help of Spin Speed Adjustment button.
Press Start / Pause / Cancel button.
C
Use a lower spin speed for delicate
laundries.
5.8 Temperature selection
Whenever a new programme is selected,
the maximum temperature for the selected
programme appears on the temperature indicator.
To decrease the temperature, press the
Temperature Adjustment button. Temperature
decreases with increments of 10° and finally, “-”
symbol indicating the cold wash option appears
on the display.
C
If you scroll to cold wash option and
press Temperature Adjustment button
again, the recommended temperature
for the selected programme appears
on the display. Press the Temperature
Adjustment button again to decrease the
temperature.
Economy symbol
Indicates the programmes and temperatures that
provide energy savings.
C
Economy symbol can not be selected in
Intensive and Hygiene programmes since
washing is performed in long times and
at high temperatures in order to provide
hygiene. Similarly, Economy symbol can
not be selected in Baby, Refresh, Drum
Cleaning, Spin and Rinse programmes
as well.
5.9 Spin speed selection
Whenever a new programme is selected, the
recommended spin speed of the selected
programme is displayed on the spin speed
indicator.
To decrease the spin speed, press the Spin
Speed Adjustment button. Spin speed decreases
gradually. Then, depending on the model of the
product, "Rinse Hold" and "No Spin" options
appear on the display. See "Auxiliary function
selection" section for explanations of these
options.
C
Rinse Hold option is indicated with “
” symbol and No Spin option is indicated
with “
” symbol.
F2
F4
F1
F3