Beko WME 8227 W Washer User Manual


  Open as PDF
of 40
 
EN
22
Softener
Softener symbol lights up at the
beginning of softener step.
Spin
Spin symbol will light up at the beginning
of the final spin, during “Spin” and
“Pump”specialprograms.
• If the machine is not spinning,
the programme may be in rinse
hold mode or the automatic
spin correction system has been
activated because of the excessive
unbalanced distribution of the
laundry in the machine.
Changing the selections after
the programme has started
The selected spin speed and
programme temperature fade out. An
empty frame appears.
Whenthe“Programmeselection”button
is brought to the appropriate position,
rpm and temperature data reappear.
Switching the machine to standby
mode
Machineisswitchedtostandbymode
bypressing“Start/Pause/Cancel”button
(Figure1-8)forashorttime.Standby
symbol(Figure2-2k)whichindicatesthat
the machine is in standby mode lights
upandthestartsymbol(Figure2-2j)that
shows the programme has started and
is still continuing fades out.
Selecting or cancelling an auxiliary
function in standby mode
Auxiliary functions can be cancelled or
selected in accordance with the step the
programme is at.
Adding/taking out laundry in standby
mode
The door can be opened if the water
level is suitable. The door locked symbol
(Figure2-2i)willlightupuntilthedoor
is suitable for opening. This symbol will
fade out as soon as the door is allowed
to open. Laundry may be added / taken
out by opening the door.
Door lock
DoorLockedSymbol(Figure2-2i)lights
up when the loading door is locked. This
symbol will flash until the door is allowed
to open. Do not force the door at this
stage. This symbol will fade out as soon
asthedoorisallowedtoopen.Youmay
open the door after the symbol fades
out.
Child/key lock
Youcanprotecttheappliancefrom
being tampered or by accidental
operation by children of this lock. In this
case, no change can be made in the
running programme.
C Yourmachinecanbeturnedon
andoffwithOn/Offbuttonwhilethe
child-proof lock is activated. In this
case, your machine will resume its
programme with child-proof lock
activated.
The machine is switched to child-lock
by pressing the 2nd and 4th auxiliary
functionsfor3sec.“C:on”(Childlockis
activated)labelappearsonthescreen.
The same symbol will also be displayed
on the screen whenever any button
is pressed while the machine is child-
locked.
 previous next