Beko WME 7227 W Washer User Manual


  Open as PDF
of 40
 
EN
23
To deactivate the child-proof lock,
press the 2nd and 4th auxiliary function
buttons for 3 sec.
“C:OFF”(Childlockisdeactivated)label
appears on the screen.
Ending the programme
through cancelling
“Start/Pause/Cancel”button(Figure
1-8)ispressedfor3secondstocancel
theprogramme.Startsymbol(Figure
2-2j)willflashduringcancellation.
After cancellation, the symbol of the
corresponding step at which the
cancellation was made will remain lit and
“End”labelwillappearonthescreen.
Programme in rinse hold
mode
• This process is shown with the
flashingSpinSymbol(Figure2-2c)
and the lit up Standby Symbol
(Figure2-2k).
If you wish to spin when the machine is
inthismode:
Adjustthespinspeed.Press“Start/
Pause/Cancel”button(Figure1-8).
The programme continues, pumps out
the water and spins. Standby Symbol
(Figure2-2k)fadesoutandStartSymbol
(Figure2-2j)lightsup.
If you want to discharge the water only
withoutspinning:
Press“Start/Pause/Cancel”button
(Figure1-8).Standbysymbol(Figure
2-2k)willfade.Startsymbol(Figure2-2j)
will light up. The programme continues
and only pumps out the water.
End of programme
When the programme is finished, the
symbols of the relevant steps will remain
lit up and the auxiliary function, spin
and temperature data selected at the
start-up of the programme will remain
selected.“End”labelwillappearonthe
screen.
 previous next