Filter
Top Products
32 EN
There is too
much foam.
Youmaynotbeusing
proper detergent for
automatic washing
machines.
Use only automatic washing machine detergents in
your washing machine.
Excessive amount of
detergent may have been
used.
Use only sufficient amount of detergent.
Too much detergent may
have been used for a small
amount of lightly soiled
laundry.
Use only sufficient amount of detergent.
Detergent may have been
stored improperly.
Store detergent in a closed and dry location. Do
not store in excessively hot places.
Type of material being
washed(laceitemswill
cause excessive foam due
totheirmeshedstructure).
Use smaller amounts of detergent for lace items.
Detergent might have
been put in the wrong
compartment.
If you put detergent in the prewash compartment
although you have not selected a prewash cycle,
the machine can take this detergent during rinsing
or softener step.
Softener being released
early.
Youmayhaveaddedtoomuchsoftener.
The detergent dispenser might be problematic.
Watermaybesiphoned(pullingthesoftenerinto
thewasherearly)duringthefillorrinsecycles.
There might be problems with the valves.
Machinedoes
work. No light
is on.
The plug might not be
plugged in the mains outlet.
Plugshouldbechecked.
Fuse may have blown. Fuse should be checked.
Electricity may be cut off. Powershouldbechecked.
The“On/Off”buttonmight
have not been pressed.
This button must be pressed.
The machine
did not start
after the
program was
selected and
the ‘Start/
Pause/Cancel’
button was
pressed.
The front door may be ajar.
“Washing”
and “Start/
Pause/Cancel”
lights are
flashing after
the program is
started.
Water may have been cut
off.
Youcanrestartyourmachinebypressingthe
“Start/Pause/Cancel”buttonforashorttimeafter
ensuring that the water is not cut off.
The“Lid”light
is flashing.
It shows the safety period
until the door lock is
opened.
For your safety, the front door can only be opened
2 minutes after the program is completed. The
“Lid”lightwillflashduringthisperiod.