Beko WMB 61432 MU Washer User Manual


  Open as PDF
of 76
 
69 / EN
Washing Machine / User’s Manual
4.11 Starting the programme
PressStart/Pausebuttontostarttheprogramme.
Programmefollow-uplightshowingthestartupofthe
programmewillturnon.
C
Ifnoprogrammeisstartedornokeyispressedwithin
1 minute during programme selection process, the
machinewillswitchtoPausemodeandtheillumination
level of the temperature, speed and loading door
indicatorlightswilldecrease.Otherindicatorlightsand
indicatorswillturnoff.OncetheProgrammeSelection
knob is rotated or any button is pressed, indicator lights
andindicatorswillturnonagain.
4.12 Child Lock
Use Child Lock function to prevent children from tampering
withthemachine.Thusyoucanavoidanychangesina
running programme.
C
IftheProgrammeSelectionknobisturnedwhenthe
ChildLockisactive,“Con”appearsonthedisplay.
TheChildLockdoesnotallowanychangeinthe
programmes and the selected temperature, speed and
auxiliaryfunctions.
C
Evenifanotherprogrammeisselectedwiththe
ProgrammeSelectionknobwhiletheChildLockis
active,previouslyselectedprogrammewillcontinue
running.
To activate the Child Lock:
Pressandhold1
st
and 2
nd
AuxiliaryFunctionbuttonsfor
3seconds.Thelightsonthe1
st
and 2
nd
AuxiliaryFunction
buttonswillflash,and"C03","C02","C01"willappearon
thedisplayrespectivelywhileyoukeepthebuttonspressed
for3seconds.Then,"Con"willappearonthedisplay
indicatingthattheChildLockisactivated.Ifyoupressany
buttonorturntheProgrammeSelectionknobwhentheChild
Lockisactive,samephrasewillappearonthedisplay.The
lightsonthe1stand2ndauxiliaryfunctionbuttonsthatare
usedtodeactivatetheChildLockwillblink3times.
To deactivate the Child Lock:
Pressandhold1
st
and 2
nd
auxiliaryfunctionbuttonsfor3
secondswhileanyprogrammeisrunning.Thelightsonthe
1
st
and 2
nd
AuxiliaryFunctionbuttonswillflash,and"C03",
"C02","C01"willappearonthedisplayrespectivelywhile
youkeepthebuttonspressedfor3seconds.Then,"COFF"
willappearonthedisplayindicatingthattheChildLockis
deactivated.
C
Inadditiontothemethodabove,todeactivatetheChild
Lock,switchtheProgrammeSelectionknobtoOn/
Offpositionwhennoprogrammeisrunning,andselect
another programme.
C
ChildLockisnotdeactivatedafterpowerfailuresor
whenthemachineisunplugged.
4.13 Progress of programme
Progressofarunningprogrammecanbefollowedfromthe
ProgrammeFollow-upindicator.Atthebeginningofevery
programmestep,therelevantindicatorlightwillturnonand
lightofthecompletedstepwillturnoff.
Youcanchangetheauxiliaryfunctions,speedand
temperaturesettingswithoutstoppingtheprogrammeflow
whiletheprogrammeisrunning.Todothis,thechange
you are going to make must be in a step after the running
programmestep.Ifthechangeisnotcompatible,relevant
lightswillflashfor3times.
C
Ifthemachinedoesnotpasstothespinningstep,
RinseHoldfunctionmightbeactiveortheautomatic
unbalanced load detection system might be activated
due to the unbalanced distribution of the laundry in the
machine.
4.14 Loading door lock
Thereisalockingsystemontheloadingdoorofthe
machinethatpreventsopeningofthedoorincaseswhen
thewaterlevelisunsuitable.
Loadingdoorlightwillstartflashingwhenthemachine
isswitchedtoPausemode.Machinechecksthelevelof
thewaterinside.Ifthelevelissuitable,LoadingDoorlight
illuminatessteadilywithin1-2minutesandtheloadingdoor
can be opened.
Ifthelevelisunsuitable,LoadingDoorlightturnsoffandthe
loadingdoorcannotbeopened.Ifyouareobligedtoopen
theLoadingDoorwhiletheLoadingDoorlightisoff,you
havetocancelthecurrentprogramme;see"Cancelingthe
programme".
4.15 Changing the selections after
programme has started
Switching the machine to pause mode
PresstheStart/Pausebuttontoswitchthemachineto
pausemodewhileaprogrammeisrunning.Thelightof
thestepwhichthemachineisinstartsflashinginthe
ProgrammeFollow-upindicatortoshowthatthemachine
hasbeenswitchedtothepausemode.
Also,whentheloadingdoorisreadytobeopened,Loading
Doorlightwillalsoilluminatecontinuouslyinadditiontothe
programme step light.
Changing the speed and temperature settings for
auxiliary functions
Depending on the step the programme has reached, you
maycanceloractivatetheauxiliaryfunctions;see,"Auxiliary
function selection".
Youmayalsochangethespeedandtemperaturesettings;
see,"Spinspeedselection"and"Temperatureselection".
C
Ifnochangeisallowed,therelevantlightwillflashfor
3 times.
Adding or taking out laundry
PresstheStart/Pausebuttontoswitchthemachineto
pausemode.Theprogrammefollow-uplightoftherelevant
stepduringwhichthemachinewasswitchedintothepause
modewillflash. Wait until the Loading Door can be opened.
Open the Loading Door and add or take out the laundry.
Close the Loading Door. Makechangesinauxiliaryfunctions,
temperature and speed settings if necessary. PressStart/
Pausebuttontostartthemachine.
 previous next