Beko WMB91242LB Washer User Manual


  Open as PDF
of 40
 
28 - EN
filter to receive water flowing from the
filter.
• Loosenpumpfilter(anticlockwise)until
water starts to flow out of it. Direct the
flowing water into the container you
haveplacedinfrontofthefilter.You
can use a piece of cloth to absorb any
spilled water.
• Whenthereisnowaterleft,turnthe
pump filter until it is completely loose
and remove it.
• Cleananyresiduesinsidethefilter
as well as fibers, if any, around the
propeller region.
• Ifyourproducthasawaterjetfeature,
be sure to fit the filter into its housing
in the pump. Never force the filter while
replacing it into its housing. Fit the filter
fullyintoitshousing;otherwise,water
may leak from the filter cap.
4- Close the filter cap.
Close the two-piece filter cap of your
product by pushing the tab on it.
Close the one-piece filter cap of your
product by fitting the tabs on the bottom
into their positions and pushing the upper
part of it.
 previous next