Beko WMB81466 Washer User Manual


 
40 / EN
Washing Machine / User’s Manual
Stand-by
Changing the programme selection after programme
has started:
Theprogrammechangeisnotallowedwhenthecurrent
programme is running.
IfyouturntheProgramme Selection knob while the
programmeisrunning,"ToMakeChangesSwitchto
Standby"appearsonthedisplay.
You can select the new programme after switching the
currentprogrammetostandby.
C
Theselectedprogramstartsanew.
Changing the auxiliary function, speed and
temperature
Dependingonthesteptheprogrammehasreached,you
cancanceloractivatetheauxiliaryfunctions;see,"Auxiliary
function selection".
You can also change the speed and temperature settings;
see,"Spinspeedselection"and"Temperatureselection".
C
Theloadingdoorwillnotopenifthewatertemperature
inthemachineishighorthewaterlevelisabovethe
door opening.
4.18 Child Lock
UseChildLockfunctiontopreventchildrenfromtampering
withthemachine.Thusyoucanavoidanychangesina
running programme.
C
You can switch on and off the machine with On / Off
buttonwhentheChildLockisactive.Whenyouswitch
on the machine again, programme will resume from
where it has stopped.
C
IfyoupressanybuttonwhentheChildLockis
activated,themachinewillgiveanaudiowarning.
Afterpressingthebuttonsfor5timesconsecutively,
audiowarningwillnotbegivenbutthewarningonthe
displaywillremainactive.
To activate the Child Lock:
Press and hold 2nd and 4th Auxiliary Function buttons
for3seconds.Afterthecountdownas"ChildLock3-2-1"
onthedisplayisover,"ChildLockEnabled"appearson
thedisplay.Youcanrelease2ndand4thAuxiliaryFunction
buttonswhenthiswarningisdisplayed.
Child Lock
Enabled
C
"ChildLockEnabled"appearsonthedisplayifyoupress
anybuttonwhenChildLockisenabled.
To deactivate the Child Lock:
Press and hold 2
nd
and 4
th
AuxiliaryFunctionbuttonsfor3
seconds.Afterthecountdownas"ChildLock3-2-1"onthe
displayisover,"ChildLockDisabled"appearsonthedisplay.
Child Lock
Disabled
4.19 Cancelling the programme
Theprogrammeiscancelledwhenthemachineisturnedoff
and on again. Press and hold On / Off button for 3 seconds.
Afterthecountdownas"Cancel3-2-1"onthedisplayis
over,themachineturnsoff.
C
IfyoupressOn / OffbuttonwhentheChildLockis
enabled, the programme will not be cancelled. You
shouldcanceltheChildLockfirst.Countdownas
"Standby3-2-1"appearsonthedisplay.
C
Ifyouwanttoopentheloadingdoorafteryouhave
cancelled the programme but it is not possible to open
theloadingdoorsincethewaterlevelinthemachine
isabovetheloadingdooropening,thenturnthe
Programme Selection knob to Pump+Spin
programme and discharge the water in the machine.
4.20 End of programme
“Laundrycanbetakenout”appearsonthedisplaywhenthe
programme is completed.
Ifyoudonotpressanybuttonfor2minutes,themachine
willswitchtostandbymode.Displayandallindicatorsare
turnedoff.OnlytheframeoftheProgramme Selection
knob remains flashing.
IfyoupressanybuttonorturntheProgramme Selection
knobwhenthemachineisinstandbymode,programme
stepsthatarecompletedwillappearonthedisplay.
4.21 Memory (Favourite) program setting
Youcancreateafavouriteprogrammebysavingfrequently
usedprogrammeandothersettings.Usethisfunctionwhen
youwanttoselectquicklythesamesettingsyouuseforthe
laundrythatyouwashregularly.
Favouriteprogrammewillremainatthefactoryset
programmeuntilyoumakeanewfavouriteprogramme
setting.
Tostoreanewfavouriteprogramme:
1. Select the desired programme, temperature, spin speed,
soilingdegreeandauxiliaryfunction.
2.KeeptheFavourite button pressed for 3 seconds.
3.Countdownas"Storingfavourite3-2-1"appearsonthe
display.