Beko WMB81445L Washer/Dryer User Manual


  Open as PDF
of 40
 
9 - EN
3
Installation
Removing packaging
reinforcement
Tilt the machine to remove the packaging
reinforcement. Remove the packaging
reinforcement by pulling the ribbon.
Opening the transportation locks
C
Transportation safety bolts must be
removed before operating the washing
machine!Otherwise,themachinewillbe
damaged!
1. Loosen all the bolts with a spanner until
theyrotatefreely(“C”)
2. Remove transportation safety bolts by
turning them gently.
3. Fitthecovers(suppliedinthebagwith
theOperationManual)intotheholeson
therearpanel.(“P”)
C
Keepthetransportationsafetyboltsin
a safe place to reuse when the washing
machine needs to be moved again in
the future.
C
Never move the appliance without the
transportation safety bolts properly fixed
in place!
Appropriate installation location
Install the appliance in environments which
have no risk of freezing, in a stable and level
position.
C
The floor must be capable of carrying
the load on it!
C
If the washing machine and a drier
are placed on top of each other, their
approximate weight together may reach
180 kg when they are full.
Important:
• Donotplacetheapplianceontopof
the power cable.
• Keepatleast1cmdistancefromthe
edges of other furniture.
• Placethemachineonafirmsurface;do
not position it on a long pile rug or such
like surfaces.
Adjusting the feet
C
Do not use any tools to loosen the lock
nuts.Otherwise,theycanbedamaged.
1. Manually(byhand)loosenthelocknuts
on the feet.
2. Adjust them until the machine stands
level and firm.
3. Important:Tightenalllocknutsup
again.
 previous next