Beko WMB81445L Washer/Dryer User Manual


  Open as PDF
of 40
 
20 - EN
Auxiliary functions
Auxiliary Function Selection Buttons
a b c d
• Dependingontheprogram,youcan
select the desired auxiliary function by
pressing the buttons a, b, c,d.
• Selecttherequiredauxiliaryfunctions
before starting the program.
• Somecombinationscannotbeselected
together.Ex.:Pre-washandQuick
Wash.
• Symboloftheselectedauxiliaryfunction
will light up.
Auxiliary function selection
If an auxiliary function that should not be
selected together with a previously selected
function is chosen, the first selected function
will be cancelled and the last auxiliary
function selection will remain active.
Ex.:Ifyouwanttoselectpre-washfirstand
then quick wash, pre-wash will be cancelled
and quick wash will remain active.
Auxiliary function that is not compatible
withtheprogramcannotbeselected.(see,
“ProgramSelectionTable”)
• Prewash
Whenyouselectthisfunction(a),thedisplay
willindicate“F1”symbol.
• Apre-washisonlyworthwhilefor
heavily soiled laundry. Without pre-wash
you save energy, water, detergent and
time.
• Pre-washwithoutdetergentis
recommended for lace and curtains.
• Quick Wash
Withthisfunction(b),thewashtimeis
shortened.“F2”symbollightsuponthe
display.
• Usethisfunctionforsmalleramountsor
slightly soiled laundries.
• Extra Rinse
Whenthisfunction(c)isselected,washing
and rinsing is performed with plenty of
water.“F3”symbollightsuponthedisplay.
• Anti- Crease
Withthisfunction(d),drummovement
will be lessened to prevent creasing and
spinning speed is limited. In addition,
washing is carried out at a higher water
level.“F4”symbollightsuponthedisplay.
• Usethisfunctionfordelicatelaundries
that crease easily.
C
Whenever you select this auxiliary
function, load your machine with half of
the maximum laundry specified in the
program table.
• Rinse Hold
If you are not going to unload your clothes
immediately after the program completes,
you may use rinse hold function and keep
your laundry in the final rinsing water in order
to prevent them become wrinkled when
thereisnowaterinthemachine.Press
“Start/Pause”buttonafterthisprocessifyou
want to drain the water without spinning.
Programresumes.Yourmachinedrainsthe
water and program completes.
If you want to spin your laundry that you left
inwater:
- Adjust the spin speed.
-PressStart/Pausebutton
Programresumes.Yourmachinedrains
the water, spins the laundry and program
completes.
Time display
The display shows the time remaining for
the program to complete while a program
is running. Time is displayed in hours and
minutes as “01:30”.
Time delay
Withthe“Timedelay”functionyoucan
delay the program start up to 24 hours.
Setting can be made in intervals of 30
 previous next