Filter
Top Products
EN
31
There is too
much foam.
Youmaynotbeusing
proper detergent for
automatic washing
machines.
Use only automatic washing machine
detergents in your washing machine.
Excessive amount of
detergent may have been
used.
Use only sufficient amount of detergent.
Too much detergent
may have been used for
a small amount of lightly
soiled laundry.
Use only sufficient amount of detergent.
Detergent may have been
stored improperly.
Store detergent in a closed and dry location. Do
not store in excessively hot places.
Type of material being
washed(laceitemswill
cause excessive foam due
totheirmeshedstructure).
Use smaller amounts of detergent for lace
items.
Detergent might have
been put in the wrong
compartment.
If you put detergent in the prewash
compartment although you have not selected
a prewash cycle, the machine can take this
detergent during rinsing or softener step.
Softener being released
early.
Youmayhaveaddedtoomuchsoftener.
The detergent dispenser might be problematic.
Watermaybesiphoned(pullingthesoftener
intothewasherearly)duringthefillorrinse
cycles.
There might be problems with the valves.
Machinedoes
work. No light
is on.
The plug might not be
plugged in the mains
outlet.
Plugshouldbechecked.
Fuse may have blown. Fuse should be checked.
Electricity may be cut off. Powershouldbechecked.
The“On/Off”buttonmight
have not been pressed.
This button must be pressed.
The machine
did not start
after the
program was
selected and
the ‘Start/
Pause/Cancel’
button was
pressed.
The front door may be
ajar.
“Washing”
and “Start/
Pause/Cancel”
lights are
flashing after
the program is
started.
Water may have been cut
off.
Youcanrestartyourmachinebypressingthe
“Start/Pause/Cancel”buttonforashorttime
after ensuring that the water is not cut off.
The“Lid”light
is flashing.
It shows the safety period
until the door lock is
opened.
For your safety, the front door can only
be opened 2 minutes after the program is
completed.The“Lid”lightwillflashduringthis
period.