Beko WM5100 Washer User Manual


  Open as PDF
of 32
 
EN
20
level in the machine is suitable. Laundry
may be added or taken out by opening
thedoor.Ifthe“Lid”lampdoesnot
light up continuously at the end of this
time, the water level in the machine
is not suitable and laundry cannot be
added.Youcanresumetheprogram
bypressingthe“Start/Pause/Cancel”
button again.
Child-proof lock
There is a childproof lock to prevent
any program interruption because of
pressing the keys while the program is
on. In order to activate the childproof
lock, press on the 1st and 2nd
auxiliary function keys from the left
simultaneously for 3 seconds after
the washing program has started.
1st auxiliary function light will flash
continuously.
To start a new program after the
program is over or to interfere the
program, childproof lock should be
deactivated. To deactivate the child-
proof lock, press the same buttons for
3 sec.
Ending the program through
canceling
The program which is selected first will
keep on going even if the position of the
program selection button is changed. A
new program can be selected or started
after“Programiscancelled”inorderto
change the washing program.
Tocancelanyselectedprogram;
• Press“Start/Pause/Cancel”button
for 3 seconds. The machine starts
todischargethewater.“Wash”and
“ProgramFinished”lightswilllight
up.
• “Start/Pause/Cancel”and“Wash”
lights will go off after discharging
processisoverandthe“Lid”light
will start flashing.
• “Lid”lampwilllightupcontinuously
whenthedoorisunlocked.Youcan
select and start a new program.
• Iftheprogramiscancelledinthe
middleoftheprocess,“Wash”
and“ProgramFinished”lightswill
light up. The machine can drain
all the water or can take in water
for 3 times at most to cool down
the clothes and complete draining
process.
• Whenthewaterdischargingprocess
iscompleted,the“Wash”lightwill
gooff,“ProgramFinished”light
willlightupandthe“Lid”lightwill
continuously flash until the door
isunlocked.Youcanmakeanew
programselectionwhenthe“Lid”
light is illuminated continuously.
End of Program
The“ProgramFinished”lamponthe
program follow-up indicator will light up
when the program comes to an end.
The lid is unlocked 2 minutes later, the
“ProgramFinished”and“Lid”lampswill
light up continuously. The machine is
now ready for a second cycle.
If any key is pressed when the machine
is at the end of the program or if
the position of the selection knob is
changed,the“ProgramFinished”light
willgooffandonlythe“Lid”lampwill
remainaslit.Meanwhile,ifthedooris
stilllocked,the“Lid”lightwillcontinue
flashing until the door is opened.
Pressthe“On/Off”buttontoshutdown
the machine.
 previous next