Beko WCY71032HPTL Washer/Dryer User Manual


  Open as PDF
of 20
 
13 / 20 EN
Washing Machine / User’s Manual
C
IftheProgrammeSelectionknobisturnedwhenthe
ChildLockisactive,“Con”appearsonthedisplay.
TheChildLockdoesnotallowanychangeinthe
programmesandtheselectedtemperature,speedand
auxiliary functions.
C
Even if another programme is selected with the
ProgrammeSelectionknobwhiletheChildLockis
active,previouslyselectedprogrammewillcontinue
running.
C
WhentheChildLockisactiveandthemachineis
running,youcanswitchthemachinetoPausemode
withoutdeactivatingtheChildLockbyturningthe
ProgrammeSelectionknobtoOn/Offposition.When
youturntheProgrammeSelectionknobafterwards,the
programme will resu
To activate the Child Lock:
Pressandhold1stand2ndAuxiliaryFunctionbuttonsfor
3seconds.Thelightsonthe1stand2ndAuxiliaryFunction
buttonswillflashwhileyoukeepthebuttonspressedfor3
seconds.
To deactivate the Child Lock:
Pressandhold1stand2ndauxiliaryfunctionbuttonsfor3
seconds while any programme is running. The lights on the
1stand2ndAuxiliaryFunctionbuttonswillflashwhileyou
keepthebuttonspressedfor3seconds.
C
Inadditiontothemethodabove,todeactivatetheChild
Lock,switchtheProgrammeSelectionknobtoOn/
Offpositionwhennoprogrammeisrunning,andselect
another programme.
C
Whenthepowerisrestoredafterapowerfailureorafter
yourmachineisunpluggedandpluggedinagain,the
ChildLockwillnotbedeactivatedwhenthemachine
resumes operating.
4.13 Progress of programme
Progressofarunningprogrammecanbefollowedfromthe
ProgrammeFollow-upindicator.Atthebeginningofevery
programmestep,therelevantindicatorlightwillturnonand
light of the completed step will turn off.
Youcanchangetheauxiliaryfunctions,speedand
temperature settings without stopping the programme flow
whiletheprogrammeisrunning.Todothis,thechange
youaregoingtomakemustbeinastepaftertherunning
programmestep.Ifthechangeisnotcompatible,relevant
lights will flash for 3 times.
C
Ifthemachinedoesnotpasstothespinningstep,
RinseHoldfunctionmightbeactiveortheautomatic
unbalancedloaddetectionsystemmightbeactivated
duetotheunbalanceddistributionofthelaundryinthe
machine.
4.14 Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases when
thewaterlevelisunsuitable.
Loading door light will start flashing when the machine
isswitchedtoPausemode.Machinechecksthelevelof
thewaterinside.Ifthelevelissuitable,LoadingDoorlight
illuminates steadily within 1-2 minutes and the loading door
canbeopened.
Ifthelevelisunsuitable,LoadingDoorlightturnsoffandthe
loadingdoorcannotbeopened.Ifyouareobligedtoopen
theLoadingDoorwhiletheLoadingDoorlightisoff,you
havetocancelthecurrentprogramme;see"Cancelingthe
programme".
Changing the selections after
programme has started
Switching the machine to pause mode
PresstheStart/Pausebuttontoswitchthemachineto
pause mode while a programme is running. The light of
the step which the machine is in starts flashing in the
ProgrammeFollow-upindicatortoshowthatthemachine
hasbeenswitchedtothepausemode.
Also,whentheloadingdoorisreadytobeopened,Loading
Door light will also illuminate continuously in addition to the
programme step light.
Changing the speed and temperature settings for
auxiliary functions
Dependingonthesteptheprogrammehasreached,you
maycanceloractivatetheauxiliaryfunctions;see,"Auxiliary
functionselection".
You may also change the speed and temperature settings;
see,"Spinspeedselection"and"Temperatureselection".
C
Ifnochangeisallowed,therelevantlightwillflashfor
3 times.
4.15 Adding or taking out laundry
PresstheStart/Pausebuttontoswitchthemachineto
pause mode. The programme follow-up light of the relevant
step during which the machine was switched into the pause
modewillflash.WaituntiltheLoadingDoorcanbeopened.
Open the Loading Door and add or take out the laundry.
ClosetheLoadingDoor.Makechangesinauxiliaryfunctions,
temperatureandspeedsettingsifnecessary.PressStart/
Pausebuttontostartthemachine.
4.16 Canceling the programme
Tocanceltheprogramme,turntheProgrammeSelection
knobtoselectanotherprogramme.Previousprogramme
willbecanceled.End/Cancellightwillflashcontinuouslyto
notifythattheprogrammehasbeencanceled.
Your machine will end the programme when you turn the
ProgrammeSelectionknob;however,itdoesnotdrainthe
waterinside.Whenyouselectandstartanewprogramme,
the newly selected programme will start depending on the
stepthepreviousprogrammewascanceledin.Forexample,
it may take in additional water or continue to wash with the
water inside.
C
Depending on the step where the programme was
canceledin,youmayhavetoputdetergentandsoftener
again for the programme you have selected anew.
 previous next