Filter
Top Products
12 / 20 EN
Washing Machine / User’s Manual
4.10 Auxiliary function selection
Use the following auxiliary functions according to
your
daily needs. Select the desired auxiliary functions
before
starting the programme. Furthermore, you may also
select
or cancel auxiliary functions that are suitable to the running
programme without pressing the Start / Pause button
when
the machine is operating. For this, the machine must
be
in
a step before the auxiliary function you are going to
select
or cancel.
If the auxiliary function cannot be selected or canceled, light
of the relevant auxiliary function will blink 3 times to
warn
the user.
Some functions cannot be selected together. If
a
second
auxiliary function conflicting with the first one is selected
before starting the machine, the function selected
first will be canceled and the second auxiliary function
selection will remain active. For example, if you
want to
select Quick Wash after you have selected the
Prewash,
Prewash will be canceled and Quick Wash will
remain
active.
An auxiliary function that is not compatible with
the
programme cannot be selected. (See “Programme and
consumption table”)
Auxiliary Function buttons may vary according to
the
model of the machine.
• Pre-wash
A Prewash is only worthwhile for heavily soiled laundry. Not
using the Prewash will save energy, water, detergent and
time.
Prewash without detergent is recommended for tulle
and curtains.
• Quick Wash
This function can be used in Cottons and Synthetics
programmes. It decreases the washing times and also the
number of rinsing steps for lightly soiled laundry.
When you select this function, load your machine with
half of the maximum laundry specified in the programme
table.
• Extra Rinse
This function enables the machine to make another rinsing
in addition to the one already made after the main wash.
Thus, the risk for sensitive skins (babies, allergic skins, etc.)
to be effected by the minimal detergent remnants on the
laundry can be reduced.
• Pet hair removal
• Rinse Hold
If you are not going to unload your clothes immediately after
the programme completes, you may use rinse hold function
to keep your laundry in the final rinsing water in order to
prevent them from getting wrinkled when there is no water
in the machine. Press Start / Pause button after this process
if you want to drain the water without spinning your laundry.
Programme w
ill resume and complete after draining the water.
If you want to spin the laundry held in water, adjust the Spin
Speed and press Start / Pause button.
The programme resumes. Water is drained, laundry is spun
and the programme is completed.
Delayed Start
Do not use liquid detergents when you set Delayed Start!
There is the risk of staining of the clothes.
Additional laundry may be loaded during the delayed
start period.
Changing the Delayed Start period
Press Delayed Start button. Every time the button is pressed,
the period will change in 3-hour increments and the light of
the selected delayed start time will turn on.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown and start
the programme immediately:
Set the Delayed Start period to zero (all delayed start period
lights will turn off) or turn the Programme Selection knob
to any programme. Thus, Delayed Start function will be
canceled. The End/Cancel light flashes continuously. Then,
select the programme you want to run again. Press Start /
Pause button to start the programme.
4.11 Starting the programme
Press Start / Pause button to start the programme.
Programme follow-up light showing the startup of the
programme will turn on.
If no programme is started or no key is pressed within
1 minute during programme selection process, the
machine will switch to Pause mode and the illumination
level of the temperature, speed and loading door
indicator lights will decrease. Other indicator lights and
indicators will turn off. Once the Programme Selection
knob is rotated or any button is pressed, indicator lights
and indicators will turn on again.
4.12 Child Lock
Use child lock function to prevent children from tampering
with the machine. Thus you can avoid any changes in a
running programme.
This function helps to remove pet hair that remain on your garments
more effectively.When you select this function, Prewash and Extra
Rinse steps are added to the normal programme. Thus, washing is
performed with more water (30%) and the pet hair is removed more
effectively.
Never wash your pets in the washing machine.
With the Delayed Start function the startup of the programme
may be delayed up to 19 hours. Delayed start time can be
increased by increments of 1 hour.
Open the loading door, place the laundry and put detergent,
etc.Select the washing programme,temperature, spin speed
and, if required, the auxiliary functions. Set the desired time
by pressing the Delayed Start button. Press Start / Pause button.
The delayed start time you have set is displayed. Delayed start
countdown starts. “_”symbol next to the delayed start time
moves up and down on the display.
At the end of the countdown, duration of the selected
programme will be displayed. “_” symbol will disappear and
the selected programme will start.