Beko DRVS 73W Clothes Dryer User Manual


 
22
EN
Fluff filter
Lint and fibres released from the laundry
to the air during the drying cycle are
collected in the “Fluff Filter”.
C Such fibre and lint are generally
formed during wearing and washing.
C Always clean the filter after each
Drying process.
C You can clean the filter and filter area
by vacuum cleaner.
For Filter cleaning;
1. Open the cover
2. Remove the fluff filter by pulling it up
and open the filter.
3. Clean lint, fibre, and the fluff by hand or
with a soft piece of cloth.
4. Close the filter and place it back into its
seat.
C Clogging may arise on the filter
surface after using your machine for
some time; if this occurs, wash the
filter with water and dry it before using
again.
Sensor (models equipped with
a sensor)
There are humidity sensors in your
machine that detect whether the laundry
is dry or not.
For sensor cleaning;
8 Maintenance and cleaning
1 Open the cover of your machine.
2 Allow the machine to cool off if drying
has been carried out.
3 Wipe the metal sensors with a soft
cloth, dampened with vinegar and dry
them.
C Clean metal sensors 4 times a year.
ANever use solvents, cleaning agents
or substances alike when cleaning as
these might cause fire and explosion!