Beko DRVS 73W Clothes Dryer User Manual


 
18
EN
Auxiliary function
Cancel audio warning
Your dryer will give an audio warning
when the programme comes to an
end. If you do not want to hear the
audio warning, press “Cancel Audio
Warning” button. The relevant light will
turn on when this button is pressed
and an audio warning will not be given
when the programme comes to an
end.
C You can select this function either
before or after the programme starts.
Warning indicators
C Warning indicators may differ
according to the model of your dryer.
Filter cleaning
A warning light will turn on to remind filter
cleaning after the programme finishes.
C If the filter cleaning warning light
lights up continuously, please refer to,
“Suggested solutions for problems”.
Water tank
Warning light starts flashing when the
tank is filled with water. The dryer stops
operating if the warning light turns on
when a programme is running. Drain
the water in the water tank to restart the
dryer. Press “Start/Pause/Cancel” button
to start the programme after you have
emptied the water tank. The warning light
turns off and the programme resumes
operating.
Time delay
If you wish to dry your clothes at a later
time, thanks to the time delay function,
you can delay the programme start up to
3 hours, 6 hours or 9 hours.
1. Open the loading door and put the
laundry in.
C Make sure that all air outlets are open,
door filter is cleaned and the water
tank is empty.
2. Set the drying programme and, if
required, the auxiliary functions.
3. When the time programming button
is pressed once, a 3 hour delay is
selected and the relevant led lights.
When the same button is pressed
again, 6 hours; and if pressed once
more, 9 hours delay will be selected.
If the time programming button is
pressed one more time, time delaying
function will be cancelled. Set the time
delay as you require.
4. Delayed operation of the selected
programme is started by pressing
the "Start/Pause/Cancel" button after
selecting the time delay.
C Additional laundry may be loaded /
taken out during the time delay period.
C During the time delay period, laundry
is rotated for 4 seconds in every 10
minutes to prevent creasing.
Canceling the time delay
If you want to cancel the time delay
countdown and start the programme:
1. Press “Start/Pause/Cancel” button for
about 3 seconds.
2. Press “Start/Pause/Cancel” button to
start the programme right away.
Starting the programme
1. Press “Start/Pause/Cancel” button to
start the programme.
2. Light of the “Start/Pause/Cancel”
button will turn on to indicate that the
programme has started.
Progress of programme
Progress of a running programme is
shown through the programme follow-up
indicator.
At the beginning of every programme
step, the relevant indicator LED will light
up and light of the completed step will
turn off.
“Drying”:
- Drying level will be illuminated during
the whole drying process until the drying
degree reaches “iron dry”.
“Iron Dry”:
- Starts to illuminate when the drying
degree reaches “iron dry” step and
remains illuminated until the next step.
“Ready to wear”:
Starts to illuminate when the drying
degree reaches “Ready to wear” step and
remains illuminated until the next step.
“Final / Anti-creasing”:
- Illuminates when the programme comes
to an end and anti-creasing function is
activated.
C If more than one LED light up or
flash concurrently, it means there is
malfunctioning or a failure (please see,
Solution suggestions for problems).