Filter
Top Products
23
EN
Starting the programme
Press Start / Pause / Cancel button to
start the programme.
Start / Pause symbol will light up to
indicate that the programme has started
and ":" symbol between the remaining
time will continue flashing.
Progress of programme
Drying
Iron
Wardrobe
(Extra)
Refresh
Anti-
creasing
Progress of a running programme is
indicated on the display by means of a
set of symbols.
At the beginning of each programme
step, the relevant symbol in the series of
symbols will light up and thus, at the end
of the programme, all symbols will remain
lit up. The rightmost symbol on the
display indicates the step being carried
out.
Drying
Drying symbol lights up in all programmes
apart from ventilation.
Iron Dry
Starts to illuminate when the dryness level
reach Iron Dry step.
Wardrobe Dry
Starts to illuminate when the dryness level
reach Wardrobe Dry step.
Wardrobe Dry Extra
Starts to illuminate when the dryness level
reach Wardrobe Dry Extra step.
Freshen Up
Ventilation symbol illuminates when the
programme comes to an end.
C
Anti-creasing symbol will illuminate
at the end of the programme if Anti-
creasing function is activated.
Child-proof Lock
Machine is equipped with a Childproof
Lock which prevents interfering with the
current programme flow by pressing
any button. All buttons except the On
/ Off button on the control panel are
deactivated when the Child-proof Lock is
active.
In order to activate the Childproof Lock,
press Audio Warning and Anti-Creasing
buttons simultaneously for 3 seconds.
To start a new programme after the
current programme is over or to interrupt
the current programme, the Child-proof
Lock should be deactivated. Press the
same buttons for 3 seconds again to
deactivate the Child-proof Lock.
C
Lock symbol will appear on the
display when the Child-proof Lock is
activated.
C
Child-proof Lock is deactivated when
the machine is switched off and on
with On / Off button.
When the Child-proof Lock is activated:
•
Display symbols will not change
even if the position of Programme
Selection knob is changed while the
machine is running or in halt.
•
If the Child-proof Lock is deactivated
after changing the position of
the Programme Selection knob
while the machine is running, the
machine stops and new programme
information is displayed.
Changing the programme after
it has started
After the machine starts, you can change
the selected programme and dry your
laundry in a different programme.
1. If you want to select Extra Dry