Beko DCU 7330 XB Dryer Accessories User Manual


 
35
EN
Auxiliary function
Audio Warning
Cancel
audio warning
Audio warning
level 1
Audio warning
level 2
Audio warning
level 3
Your dryer will give an audio warning when the
programme comes to an end. If you do not want
to hear this buzzing or want to change the volume
level, you need to press the “Volume level” button.
No audio warning will be given when “x” appears on
the screen.
C You can select this function either before or
after the programme starts.
Drying degree
Used to adjust the required dryness level. More
drying is performed compared to the default
settings when “+” sign appears and less drying
is performed when “-” sign appears. Programme
duration can change depending on the selection.
A This function must be selected before the
programme starts.
Anti-creasing
A 2-hour anti creasing programme to prevent
laundry from creasing will be activated if you do not
take the laundry out after the programme is over.
This programme rotates the laundry in 600-second
intervals to prevent creasing. Press “Anti-creasing”
button to activate.
Anti-creasing is activated but the programme is
running in the first exemplary figure. Drying is over
and the first step of anti-creasing has started in the
second figure.
Changing the contrast
Contrast can be adjusted in order to make the
symbols on the display appear clearer. It may
particularly be necessary to change the contrast
setting of the display when the dryer is installed
over a washing machine.press and
Press and hold the Spin Speed/Time button for 3
seconds.
When the contrast is changed at the end of 3
seconds, all symbols on the display will become
visible for 3 seconds in order to indicate that the
process is complete.
Perform the same procedure to revert back to the
previous contrast setting.
Warning indicators
C Warning indicators may differ according to the
model of your machine.
Filter cleaning
A warning symbol will appear to remind filter
cleaning after the programme finishes.
C f the filter cleaning symbol flashes continuously,
please refer to “Suggested solutions for
problems”.
Water tank
A warning symbol will turn on at the end of the
programme or when the tank is full with water. The
machine stops operating if the warning symbol
turns on when a programme is running. To restart
the machine, please drain the water in the water
tank. Press “Start/Pause/Cancel” button to start the
programme after you have emptied the water tank.
The warning symbol turns off and the programme
resumes operating.
Cleaning the condenser
Warning symbol turns on with certain intervals to
remind that the condenser needs cleaning.