Filter
Top Products
7
Note: Set the Variable Steam Control Knob
to position after use.
Burst of Steam
This function provides extra amount of steam
to remove stubborn wrinkles.
1. Fill the iron as described in the section of
How To Fill Water.
2. Turn the Temperature Dial to ‘•••’ (3 dots)
setting.
3. Pilot light glows indicating the iron is
switched on.
4. Pilot light goes off when the required
temperature is reached.
5. The iron is ready for use.
6. Press the Burst Of Steam Button.
7. Steam will shoot from the holes of the
soleplate into the fabric being ironed and
removing the wrinkles.
8. For stubborn wrinkles, wait a few seconds
before pressing the Burst Of Steam Button
again. Most wrinkles can be removed within
three presses.
Note: It may be necessary to press the burst
of steam button a few times to start this
function.
For optimum steam quality, do not operate
the Burst Of Steam more than three times in
succession.
Burst of Steam in Vertical
Position
Warning:
Do not apply steam on any clothes or fabrics
that are being worn by human or pets.
Temperature of steam is very high.
This function provides extra amount of steam
to remove wrinkles on delicate garments in
hanging position, hanging curtains, or other
hanging fabrics.
1. Fill the iron as described in the section of
How To Fill Water.
2. Turn the Temperature Dial to ‘Max’ setting.
3. Pilot light glows indicating the iron is
switch on.
4. Pilot light goes off when the required
temperature is reached. The iron is now
ready for use.