Filter
Top Products
8
5. Hold the iron between 15 and 30 centime-
ters away from the garment.
6. Press the Burst of Steam Button once.
7. Steam will penetrate into the garment
removing the wrinkles.
8. For Stubborn wrinkles, wait a few seconds
before pressing the Burst Of Steam Button
again.
9. Most wrinkles can be removed within
three presses.
Note: It may be necessary to press the burst
of steam button a few times to start this
function.
For optimum steam quality, do not operate
the Burst Of Steam more than three times in
succession.
Build-in Anti-scale System
The build-in anti-scale cartridge is designed
to reduce the build-up of limescale which oc-
curs during steam ironing. This will prolonge
the working life of your iron.
Note: The anti-scale cartridge will not com-
pletely stop the natural process of limescale
build-up.
Self-Cleaning
This function removes the scales and
minerals built up in the Steam Chamber. The
iron will remain in the best condition if this
function is performed at least once a month
or more regularly depending on the hardness
of the water used.
1. Fill the iron as described in How To Fill
Water; fill the water tank up to half.
2. Place the iron on a surface in upright
standing position.
3. Connect to a mains supply outlet.
4. Turn the Temperature Dial in clockwise
direction to ‘Max’ setting.
5. Pilot light glows indicating the iron is
switched on.
6. Pilot light goes off when the required
temperature is reached.
7. Wait for one more cycle; pilot light glows
Self Clean