13
OPERATING YOUR PORTABLE WASHER
Preparation
Before Washing
Prepare the wash load. Mix large and small articles in a load to get the best washing results.
Drop articles loosely into the inner tub. Do not pack articles in or wrap them. Articles should move
freely through the wash water for best cleaning results. Articles should rollover, sink and then
reappear.
When washing very large articles, do not fill inner tub as full as with other loads. The water level in
your washer should fit the size of your wash load. Small load will use lower water levels. There must
be enough water in the inner tub to allow articles to move and turn over freely. Overloading the inner
tub can result in poor washing and rinsing. Overloading may also cause wrinkling and tearing of
articles.
WATER LEVEL
Right Wrong
6) Add the suitable
quantity detergent
into the detergent
dispenser.
5) Put the wash load into
the tub and close the
lid. Wash function
may continue with lid
open, but it has to be
closed during spin
function.
3) Please set the plug into the
socket. For safety the plug
should have ground connection.
1) Connect the inlet hose and
turn on the faucet, Don t switch
on the power if water pressure
is lower than 0.05 Mpa and
higher than 0.5 Mpa.
2) Open the faucet.
4) Insert the end of the drain
hose into the hook shelf, and
hang the drain hose over a drain
outlet.
0
.
7
m
~
1
.
2
m
Close the lid,
otherwise the
washing machine
will not operate