Asko W6761 Washer User Manual


 
Page 18
Temperature
This lets you set the wash temperature. The options are
85°, 105°, 120°, 140°, 160°, 175°, and 205°. Only the
temperatures available for the wash program you
selected will display. (See the Options Available chart
on page 17.)
1. Press MENU until Select temperature displays.
2. Use the Arrow buttons to raise or lower the
temperature setting.
3. When the temperature you prefer displays, press
ENTER. The LCD will display the new temperature.
4. If you only want to use this setting temporarily (for
this one load), press START. When the program
ends it will revert back to the previous setting.
5. If you want to save this setting permanently, press
ENTER again then press START. The program will
retain the change.
NOTE: To prevent inadvertent damage to fabrics, the
highest temperature you can change
permanently is 140°.
Spin Speed
This lets you set the spin speed. The spin speeds
advance in 200 rpm increments. Only the spin speeds
available for the wash program you selected will display.
(See the Options Available chart on page 17.)
1. Press MENU until Select spin speed displays.
2. Use the Arrow buttons to raise or lower the spin
speed setting. To omit the spin cycle, press the arrow
button until No Spin displays. To omit the spin and
final drain cycles, press the arrow until No Drain
displays. (Note: You will have to run a drain program
to open the door.)
3. When the spin speed you prefer displays, press
ENTER. The LCD will display the new spin speed.
4. If you only want to use this setting temporarily (for
this one load), press START. When the program
ends it will revert back to the previous setting.
5. If you want to save this setting permanently, press
ENTER again then press START. The program will
retain the change.
NAVIGATING THE MENUS
The following paragraphs explain how to navigate
through the menus and customize the preset programs.
If you dont want to make changes in all of the menus,
continue to press MENU until the one you do want to
change displays.
To restore a preset program to its factory default setting,
simply press the button for the preset program you want
to restore (P1P4) and hold it down while your press
ENTER. The program will revert to its factory default
setting.
If you change your mind in the process of changing a
program, press the Power button to switch the washer
off. When you switch the power back on, the program
will be as originally set.
Remember, the first step to customizing a preset
program is to press the button for the program
you want to customize (P1P4).
Programs
This lets you set the wash program you prefer. (See the
Available Programs chart on page 16.) You also use
this menu to set the machine for a rinse, spin, or drain
program.
1. Press MENU until Select Program displays.
2. Use the Arrow buttons to scroll through the
programs (Heavy, Normal, Light, etc.).
3. When the program you prefer displays, press
ENTER. The LCD will display the new program.
4. If you only want to use this setting temporarily (for
this one load), press START. When the program
ends it will revert back to the previous setting.
5. If you want to save this setting permanently, press
ENTER again then press START. The program will
retain the change.