Filter
Top Products
NA
5
www.aristonappliances.us
Unpacking
Unpacking
1. Using scissors, cut
carefully along one
corner post to remove
the film.
2. Open the door, check
inside the drum and
remove the
accessories bags.
! Retain all packaging
material until
installation is
complete.
3. Lift of the polystyrene
top cap and remove the
four corner posts.
4. Carefully lay the left side
of the machine down
onto the top cap.
! We reccomend that
a second person help
to raise and lower
the machine.
5. Remove the polystyrene
base.
6. ! IMPORTANT
check when
unpacking your
machine:
! This is the part of the
polystyrene base and should
have stayed intact when
you removed the base.
If it has broken off and is still
in the machine
remove
it while the machine is still
laying on its side on the top
cap.
7. Stand the machine
upright.
Protect the environment
Please dispose of the
packaging material carefully
and considerately.
! Continue to read the rest
of these instructions
carefully; the following
pages contain important
information on installation
and troubleshooting.
! Keep this instruction book on hand in order to refer to it when necessary. Take it you when you move, and
should you sell this appliance or pass it on to an other party, make sure that this booklet is supplied along with
the appliance so that the new owner may be informed about warnings and suggestions on how the works.