Filter
Top Products
NA
11
www.aristonappliances.us
Program
and Option Modifiers
Option modifiers
Superwash:
Use this option to select a more intensive wash and time program for the cotton (Heavy cotton, Regular cotton) and synthetics-
permanent press (Heavy synthetics, Regular Synthetics).
Pre-wash Button:
For heavily soiled loads, push this button to add an extra wash to any wash program (except 3-4-7-10-11 programs).
Easy Iron Button (Rinse Hold):
This option reduces the amount of creasing on fabrics, making them easier to iron.
Selecting this option the washing machine will reduce wash action and spin speed (max 600 rpm) for programs
5-6-7 and the machine will stop on the last rinse.
For the Silk program, the Soaking (stop with water) is automatically carried out also if the button Easy iron is not pressed:
the washer will pause the cycle in the final rinse with laundry soaking in water.
The machine will stay in this state until the Start/Cancel button is pressed again.
Extra Rinse:
Additional rinse Increases the efficiency of the rinse (except programs 8-9-10-11).
Note: This function will carry out a full extra rinse to ensure maximum possible detergent removal.
Particularly useful for people with sensitive skin.
Variable Spin Speed Dial:
Use this option to reduce the spin speed below the maximum for the program you have chosen.
Note: The washing machine will automatically prevent you from selecting a spin speed higher than the maximum speed for
each program.
Variable Temperature Dial
*.:
Use this knob to set your wash water temperature. Choose between COLD, WARM, HOT, AUTO or variations between
.
*.Note: When you set the Dial on Auto the washing machine will load water either hot, warm or cold
according to the the chosen program, and anyhow at the higher level (of temperature) of the program.
Warning: Whether you select an option unsuitable to the chosen program the corresponding LED will blink for some seconds and
then will go out.
Instead, if the the chosen option is suitable to the chosen program the button LED will stay on.