Filter
Top Products
Changes the preset wash water
temperature of the selected
program
Rotate
knob to the desired wash
temperature
Rinse water is always
COLD
•
Changes/excludes the preset
spin cycle of the selected
program
Rotate knob
to the desired speed
Select for No Spin
Faster spinning will
extract more water
from highly absorbent
fabrics
•
•
Adds a one hour soak to the
selected washing program
Press
button (in)
During soaking, laun-
dry is gently tumbled
•
Adds one extra rinse to the
selected Cotton Heavy Duty or
Permanent Press program
Press
button (in)
Recommended for
very large loads, when
too much detergent is
used or for detergent
contact allergies.
•
Automatically stops the selected
Permanent Press or Hand
Washables program before
the spin cycle begins. Laundry
soaks in water until the Easy
Iron button is pressed again.
Press
button (in)
Program will stop when it
reaches the symbol on
the Programs dial.
Press button
again (out)
Prevents wrinkles
caused when laundry is
not removed promptly
from the drum.
Use this option when
you know you won’t
be able to remove the
laundry until long after
the cycle is finished.
•
•
Adds an extra wash to the
selected program
(Not available in “Wool” cycle)
Press
button (in)
Recommended for
heavily soiled loads
like work clothes or
children’s clothes.
•
On Dial
Delay’s the start of the
washing program by 1, 3, 9 or 12
hours so laundry is ready when
you are.
Rotate dial
clockwise and select
Press button (in).
Wait 5 seconds for the
to stop
flashing.
Rotate the
dial clockwise and select
a washing program.
The On-Off lamp will
flash (1 second on, 4
seconds off) to indicate
a has been
set. The door can be
opened or closed at
any time before the
cycle begins.
•
Cancels/Interrupts the
selected program
Rotate the
dial clockwise to a
position.
Wait 5 seconds.
Rotate the
knob to the desired
washing program or
(see right).
select
(Drain). After the
washer drains, wait for
the light
to extinguish before
attempting to open the
door.