Filter
Top Products
ELECTRICAL SHOCK HAZARD
Plug washer-dryer into a
grounded 3 prong outlet.
Do not remove ground prong.
Do not use adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire, or electrical shock.
WARNING
!
• Check to be sure all parts are now installed. If
there’s an extra part, go back through the steps to
see which step was skipped.
• Check to be sure you have all your tools.
• Dispose/recycle all packaging materials.
• Read this manual.
Instructions and Installation Kit have been re-
moved from the tub.
Transit bolts/spacers have been removed.
Washer is plugged into electrical outlet and is
properly grounded.
Water hoses are connected to the faucets with
inlet screens and washers.
Water is turned on and checked for leaks at
faucet and water valve connections.
Drain hose is properly located into drain facility
and is not collapsed or damaged.
Washer has been leveled.
Test for proper operation
Measure 1 to 2 tbsp. of powdered High Efficiency (HE)
detergent.
• Pour the detergent into
compartment 2 in the
dispenser drawer
.
• Select program “4” on the
dial.
• Select HOT on the
knob
• Press the button
(in). Allow the washer to
complete the full cycle. (It
will take approx. 40 min.)