Filter
Top Products
EN
7
WASH CYCLE
SELECTOR knob
Button with ON/OFF
indicator light
Touch control panel
TEMPERATURE
button
OPTION
buttons
DISPLAY
ECO
indicator light
START/PAUSE button
with indicator light
LOCK
indicator light
WASH CYCLE
PHASE icons
SPIN SPEED
button
DELAY
TIMER button
CHILD LOCK button
with indicator light
Button with ON/OFF indicator light: press this briefly to switch
the machine on or off. The green indicator light indicates that the
machine is switched on. To switch off the washing machine during
the wash cycle, press and hold the button for approximately
3 seconds; if the button is pressed briefly or accidentally the
machine will not switch off. If the machine is switched off during
a wash cycle, this wash cycle will be cancelled.
WASH CYCLE SELECTOR knob: may be turned in either
direction. To select the most suitable wash cycle, please refer
to the “Table of wash cycles”.
The knob will not move during the wash cycle.
TEMPERATURE button: press to modify or exclude the
temperature setting; the value selected will appear on the display
above (see “Running a wash cycle”).
SPIN SPEED CYCLE button: press to modify or exclude the
spin cycle; the value selected will appear on the display above
(see “Running a wash cycle”).
DELAY TIMER button: press to set a delayed start for the
selected wash cycle; the set delay time will appear on the display
above (see “Running a wash cycle”).
OPTION buttons with indicator lights: press to select the available
options. The indicator light corresponding to the selected option
will remain lit (see “Running a wash cycle”).
DETERGENT and SOFTENER buttons : refer to
“Modifying pre-set parameters” in the chapter “Auto Dose System”.
DETERGENT DILUTION button: refer to “Filling the tanks”
in the chapter “Auto Dose System”.
WASH CYCLE PHASE icons: these illuminate to indicate the
progress of the wash cycle (Wash – Rinse – Spin –
Drain ). The text lights up when the cycle is complete.
START/PAUSE button with indicator light: when the green
indicator light flashes slowly, press the button to start a wash
cycle. Once the cycle has begun the indicator light will remain
lit in a fixed manner. To pause the wash cycle, press the button
again; the indicator light will flash in an orange colour.
If the “LOCK” indicator light is switched off, the door may be
opened. To start the wash cycle from the point at which it was
interrupted, press the button again.
LOCK indicator light: indicates that the porthole door is
locked. To open the door, pause the wash cycle (see “Running
a wash cycle”).
CHILD LOCK button with indicator light: to activate or
deactivate the control panel lock, press and hold the button for
approximately 2 seconds. when the indicator light is illuminated,
the control panel is locked (apart from the ON/OFF button). This
means it is possible to prevent wash cycles from being modified
accidentally, especially where there are children in the home.
ECO indicator light: the icon lights up when, after altering the
washing parameters, an energy saving of at least 10% is made.
Furthermore, before the machine enters “Standby” mode, the
icon will light up for a few seconds; when the machine is switched
off the estimated energy saving will be around the 80% mark.
CHANGE LANGUAGE
The first time the machine is switched on, the first language
will flash on the display. The
“ “, “OK” and “V” symbols will appear on the display, in line
with the 3 buttons on the right-hand side. The languages
change automatically every 3”; alternatively, they can be
changed by pressing the buttons next to the “ “ and “V”
symbols. Use the “OK” button to confirm the language, which
will be set after 2”. If no buttons are pressed, the automatic
language change will begin again after 30”.
To change the language, switch the machine on and off
again; in the 30” time period after it has been switched
off, press and hold the temperature +spin
+delayed start buttons simultaneously for 5’’. A short
sound alert will be emitted and the set language will flash
on the display. Press the buttons next to the “ “ and “V”
symbols to change the language. Use the button next to the
“OK” symbol to confirm the language, which will be set after
2”. If no buttons are pressed, the language set previously will
be displayed after 30”. Switch on the machine.
DETERGENT
button
SOFTENER
button
DETERGENT
DILUTION
button
7