Filter
Top Products
6
SECTION II
SPECIFICATIONS/COMPONENT IDENTIFICATION
A. SPECIFICATIONS
IMPORTANT: Steam dryers must be provided with clean, dry, and regulated 80 PSI +/- 10 PSI
(5.51 bars +/- 0.69 bars) air supply.
NOTE: ADC reserves the right to make changes in specifications at any time without notice or
obligation.
BASKET (TUMBLER) DIAMETER 37” 94 cm
BASKET (TUMBLER) DEPTH 36” 91.5 cm
BASKET (TUMBLER) MOTOR 1 HP* 0.746 kw
DOOR OPENING (DIAMETER) 31-3/8” 79.7 cm
BASKET (TUMBLER) VOLUME 22.4 cu. ft. 0.634 cu. m.
DRYERS PER 20’/40’ CONTAINER 10/20
DRYERS PER 45’/48’ TRUCK 24/24
VOLTAGE AVAILABLE 120-460v 1ø-3ø 50/60 Hz
APPROX. WEIGHT (UNCRATED) 721 lbs. 327 kg
APPROX. WEIGHT (CRATED) 771 lbs. 349.7 kg
HEAT INPUT 200,000 btu/hr 50,400 kcal/hr
AIRFLOW 1,200 cfm 33.98 cmm
INLET PIPE SIZE 3/4” N.P.T.**
VOLTAGE AVAILABLE 208-460v 1ø-3ø 50/60 Hz
APPROX. WEIGHT (UNCRATED) 721 lbs. 327 kg
APPROX. WEIGHT (CRATED) 771 lbs. 349.7 kg
AIRFLOW 1,200 cfm 33.98 cmm
VOLTAGE AVAILABLE 120-460v 1ø-3ø 50/60 Hz
APPROX. WEIGHT (UNCRATED) 757 lbs. 343.4 kg
APPROX. WEIGHT (CRATED) 807 lbs. 366.1 kg
AIRFLOW 1,350 cfm 38.23 cmm
COMPRESSED AIR VOLUME 0.75 cfh 0.02 cmh
AIR CONNECTION 1/8” F.P.T.
STEAM CONSUMPTION
BOILER HP NORMAL
LOAD
238.7 lbs./hr 108.3 kg/hr 7
OPERATING STEAM PRESSURE STEAM SUPPLY STEAM RETURN
125 PSI max 8.6 bars 1” F.P.T. 1” F.P.T.
Shaded areas are stated in metric equivalents
* For non-reversing models.
** A minimum of 3/4-inch pipe must be supplied to the gas inlet for each dryer.
GasElectricSteam