Filter
Top Products
37
L. COMPRESSED AIR REQUIREMENTS
The model MD-170 dryer requires an external supply of compressed air of 2.5 cfm at 80 PSI (552 kPa). For
Steam Models, compressed air is necessary for the air operated steam damper. On both the Steam Model as well
as the Gas Model, compressed air is necessary/required for blower air jet operation...to clean lint from the
impellor/fan (squirrel cage).
1. Air Requirements
2. Air Regulation
a. No air regulation or filtration is provided with the dryer. External regulation/filtration of 80 PSI (552 kPa)
must be provided. It is suggested that a regulator/filter gauge arrangement be added to the compressed
air line just before the dryer connection. This is necessary to insure that correct and clean air pressure is
achieved.
3. Air Connection
a. Air connection to this system is a 1/8-inch F.P.T. (refer to the illustration below).
C
OMPRESSED
A
IR
S
UPPLY
A
IR
P
RESSURE
Normal 80 PSI 552 kPa
Minimum Supply 70 PSI
483 kPa
Maximum Supply 90 PSI
621 kPa
Shaded areas are stated in metric equivalents