Filter
Top Products
450592-3 Telephone: 01422 822282 / Fax: 01422 824390 27
Hot Surface Ignition Burner Assembly
Illus. No. Part No. Qty. Description
1 817110* 1 Natural Gas Burner Assembly Complete Less Orifices
For Models Manufactured with Natural Gas ONLY
(includes illus. nos. 1 through 9 and 11 through 31)
817111* 1 Liquid Propane Gas Burner Assembly Complete Less Orifices
For Models Manufactured with Liquid Propane Gas ONLY
(includes illus. nos. 1 through 9 and 11 through 31)
810046 1 Burner Box ONLY
883299 1 Liquid Propane Conversion Kit
2 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
3 150309 3 #10-16 x 1/2” Hex Head TEK Crimptite Screw
4 810029 1 Hot Surface Ignition Module Mounting Bracket
5 128975 1 Hot Surface Ignition Module II
6 141105 4 Large Burner Tube
7 150103 4 #8-32 x 3/4” Phillips Round Head Machine Screw
8 153000 4 #8 Steel Burr
9 151001 4 #8-32 Pal Nut
10** 140819 4 #30 Burner Orifice (natural gas) ONLY
140803 4 #49 Burner Orifice (liquid propane gas) ONLY
11 141210 1 4-Port Manifold
12 318700 2 Pipe Bracket (bent)
13 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
14 128933 1 CE 1/2” 24 VAC Redundant (natural gas) Gas Valve
883255 1 CE 1/2” 24 VAC Liquid Propane Gas Valve Assembly
15 141314 1 1/2” Union Shutoff with Tail Piece
16 142809 1 1/2” x 29-1/8” Nipple
17 323737 1 Pipe Bracket
18 319704 1 Hi-Limit Mounting Bracket
19 151000 2 #6-32 Pal Nut
20 150001 2 #6-32 x 1/2” Phillips Round Head Machine Screw
21 130201 1 330° Hi-Limit ONLY
22 –––––– 1 Sail Switch
(refer to Sail Switch Assembly on
page 32)
23 142936 1 3/4” x 1/2” Coupling (CE Only)
24 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
25 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
26 151001 2 #8-32 Pal Nut
27 150309 3 #10-16 x 1/2” Hex Head TEK Crimptite Screw
28 128912 1 Hot Surface Ignition Flame Sensor
29 150301 1 #8-18 x 7/16” Phillips Pan Head TEK Screw
30 881597 1 Hot Surface Ignitor (2-1/2” length) – 24 VAC
31 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw
* Burner orifices are not included and must be ordered separately.
** Consult factory for elevations over 2,000 feet.