American Dryer Corp. D75 Clothes Dryer User Manual


 
450592-3 Telephone: 01422 822282 / Fax: 01422 824390 21
Reversing T.E.F.C. Motor Mount Assembly
Illus. No. Part No. Qty. Description
1 100109 1 4L-650 V-Belt (to idler assembly)
2 100701 1 3/16” x 3/16” x 1” Key
3 101139 1 5/8” x 2-3/4” Motor Pulley
4 120200 1 3/8” x 90° Connector
5 181003 1 1/2 hp 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled Motor (56Z frame)
6 150501 4 5/16-18 x 3/4” Tap Bolt
7 153002 4 5/16” Lock Washer
8 153001 4 5/16” Flat Washer
9* 100075 1 1 hp 200-230/460/60 380-415/50 Motor
(for models mfd. as of February 8, 2003)
100007 1 1/2 hp 220/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled Motor
with 1/2” Shaft (56Z frame)
(for models mfd. prior to February 8, 2003)
10 120200 1 3/8” x 90° Connector
11 150501 4 5/16-18 x 3/4” Tap Bolt
12 153002 4 5/16” Lock Washer
13 153001 4 5/16” Flat Washer
14 154000 8 5/16-18 Tinnerman Nut
15 152004 7 5/16-18 Hex Nut
16 153002 7 5/16” Lock Washer
17 153001 7 5/16” Flat Washer
18 850021 1 Reversing Motor Mount ONLY (56Z frame)
803885** 1 50 Hz Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete
(includes illus. nos. 2 through 14 and 18 through 24)
19 117604 4 Neoprene Sponge Tape (sold by the foot)
20 153051 1 3/4” S.A.E. Flat Washer
21 100714 1 3/16” x 3/16” x 1-7/8” Key
22 882670 1 16” Impellor (3/4” bore)
(for models mfd. as of February 8, 2003)
802100 1 16” Impellor (1/2” bore)
(for models mfd. between August 2, 2002 and February 8, 2003)
100604 1 12-1/2” Impellor (1/2” bore)
(for models mfd. prior to August 2, 2002)
23 153050 *** 1/2” S.A.E. Flat Washer
24 152006 2 1/2-20 Left Hand Jam Nut
* Check part number on motor data label to verify correct motor.
** Specify voltage when ordering.
***As required.