Filter
Top Products
46
Input/Output (I/O) Board Output Description (“Green” light emitting diode [L.E.D.])
1. FAN – (GREEN L.E.D.) This L.E.D. will indicate the status of the Fan output. If the request to turn
on the Fan (blower) is made, then the L.E.D. is ON.
2. FWD – (GREEN L.E.D.) This L.E.D. will indicate the status of the Basket (Tumbler) Forward direction
output. If the request to tumble the drum in the Forward direction is made,
then the L.E.D. is ON.
3. REV – (GREEN L.E.D.) This L.E.D. will indicate the status of the Basket (Tumbler) Reverse direction
output. If the request to tumble the drum in the Reverse direction is made,
then the L.E.D. is ON.
4. AIR JET – (GREEN L.E.D.) This L.E.D. will indicate the status of the Air Jet output. If the request to
turn on the Air Jet is made, then the L.E.D. is ON.
5. HEAT – (GREEN L.E.D.) This L.E.D. will indicate the status of the Front Heat output. If the request
to turn on the Front Burner is made, then the L.E.D. is ON.
6. STEAM – (GREEN L.E.D.) This L.E.D. will indicate the status of the Steam Injection output. If the
request to turn on the Steam Injection is made, then the L.E.D. is ON.
7. AUX – (GREEN L.E.D.) This L.E.D. will indicate the status of the F.S.S. output. If the request to
turn on the F.S.S. is made, then the L.E.D. is ON.
Input/Output (I/O) Board Input Description (“Red” L.E.D.)
8. FUSE – (RED L.E.D.) This L.E.D. will indicate the status of the (F2), which fuses the 24 VAC
supplied to the board.
9. LINT – (RED L.E.D.) This L.E.D. will indicate the status of the Lint Drawer. If the drawer is
closed, then the L.E.D. is ON.
10. MAIN – (RED L.E.D.) This L.E.D. will indicate the status of the Front Doors. If the doors are
closed, then the L.E.D. is ON.
11. EXHL – (RED L.E.D.) This L.E.D. will indicate the status of the Exhaust Hi-Limit Disk. If the
disk is closed (Temperature below 225º F [107º C]), then the L.E.D. is ON.
12. SAIL – (RED L.E.D.) This L.E.D. will indicate the status of the Sail Switch. If the switch is
closed, then the L.E.D. is ON.
13. BRHL – (RED L.E.D.) This L.E.D. will indicate the status of the Burner Hi-Limit Disk. If the disk
is closed (Temperature below 330º F [166º C]), then the L.E.D. is ON.
14. GAS_V – (RED L.E.D.) This L.E.D. will indicate the status of the Gas Valve. If the Gas Valve is
open (ON), then the L.E.D. is ON.
15. ESTOP – (RED L.E.D.) This L.E.D. will indicate the status of the Emergency Stop Switch. If the
Emergency Stop Switch is open (ON), then the L.E.D. is ON.
OUTPUTS: (GREEN)
1. FAN - Blower Fan On
2. FWD - Basket (Tumbler) Forward
3. REV - Basket (Tumbler) Reverse
4. AIR JET - Air Jet On
5. HEAT - Front Heat
6. STEAM - Steam Injection
7. AUX - Fire Suppression System (F.S.S.) Active On
INPUTS: (RED)
8. FUSE - 24 VAC To Board (F2)
9. LINT - Lint Drawer Closed
10. MAIN - Main Door Closed
11. EXHL - Exhaust High Limit
12. SAIL - Sail Switch
13. BRHL - Burner High Limit
14. GAS_V - Gas Valve
15. ESTOP - Emergency Stop