Filter
Top Products
30
American Dryer Corp.
113159-2
K. PREOPERATIONAL INSTRUCTIONS
To start the dryer ( microprocessor controller [computer] dryers):
1. The light emitting diode (L.E.D.) display will read “REAdY.”
2. Press the “E” on the keyboard (touch pad).
3. The dryer will start and the L.E.D. display will flash “dRYING MANUAL CYCLE,” “dRY TEMP 180º F,”
“COOL TEMP 80º F,” “30 REMAIN,” and “dRUM TEMP.”
Refer to the User’s Manual for detailed operating instructions.
L. SHUTDOWN INSTRUCTIONS
If the dryer is to be shutdown (taken out of service) for a period of time, the following must be performed:
1. Discontinue power to the dryer either at the external disconnect switch or the circuit breaker.
2. Discontinue the gas or steam supply:
a. GAS MODELS - discontinue the gas supply.
1) SHUT OFF external gas supply shutoff valve.
2) SHUT OFF internal gas supply shutoff valve located at the gas valve train area.
b. STEAM MODELS - discontinue the steam supply.
SHUT OFF external steam valves in the supply lines and the return lines.