31
J. PREOPERATIONAL INSTRUCTIONS
1. To start the dryer:
a. Microprocessor Controller (Computer) Dryers...
1) The light emitting diode (L.E.D.) display will read READY.
2) Press the E on the keyboard (touch pad).
a) The dryer will then start (rotate).
3) The L.E.D. display will now show the cycle in progress and cycle status.
Refer to the Users Manual for detailed operating instructions.
b. Dual Timer Dryers...
1) Turn drying timer knob for a time of 20 minutes.
2) Select High Temp.
3) Push Start button.
4) To stop dryer, open the main door.
K. SHUT DOWN INSTRUCTIONS
If the dryer is to be shut down (taken out of service) for a period of time, the following must be performed:
1. Discontinue power to the dryer either at the external disconnect switch or the circuit breaker.
2. Discontinue the heat supply:
a. GAS MODELS...discontinue the gas supply.
1) SHUT OFF external gas supply shutoff valve.