Filter
Top Products
6
SECTION II
SPECIFICATIONS/COMPONENT IDENTIFICATION
A. SPECIFICATIONS
Shaded areas are stated in metric equivalents
* For non-reversing models only.
** A minimum of 3/4 pipe must be supplied to the gas inlet for each dryer. Size of piping to dryer varies with installation conditions.
Contact factory for assistance.
NOTE: ADC reserves the right to make changes in specifications at any time without notice or
obligation.
Gas
MAXIMUM CAPACITY (DRY WEIGHT) 75 lbs 34 kg
BASKET (TUMBLER) DIAMETER 44-1/2”
113.03 cm
BASKET (TUMBLER) DEPTH 24-7/8”
63.18 cm
BASKET (TUMBLER) VOLUME 22.4 cu. ft.
0.634 cu. m.
BASKET
(TUMBLER) MOTOR 1 HP* 0.746 kw
DOOR OPENING (DIAMETER) 31-3/8”
79.7 cm
DRYERS PER 20’/40’ CONTAINER 8/18
DRYERS PER 48’/53’ TRUCK 24/26
VOLTAGE AVAILABLE 120-460v 1ø, 3ø 50/60 Hz
APPROX. WEIGHT
(UNCRATED) 888 lbs 402.8 kg
APPROX. WEIGHT (CRATED) 938 lbs
425.5 kg
HEAT INPUT 204,000 btu/hr
51,408 kcal/hr
AIRFLOW 1,200 cfm
33.98 cmm
INLET PIPE CONNECTION 3/4” N.P.T.**