Filter
Top Products
6
SECTION II
SPECIFICATIONS/COMPONENT IDENTIFICATION
A. SPECIFICATIONS
Shaded areas are stated in metric equivalents
* Motor specifications are for non-reversing models only. Please consult factory for reversing specifications.
** S.A.F.E. system must be supplied with a 40 PSI min +/- 20 PSI (2.75 bar +/- 1.37 bar) water supply.
IMPORTANT: Steam dryers must be provided with a clean, dry, regulated 80 PSI ± 10 PSI
(5.51 bar ± 0.68 bar) air supply.
NOTE: ADC reserves the right to make changes in specifications at any time without notice or
obligation.
Gas
042903
MAXIMUM CAPACITY (DRY WEIGHT) 75 lbs
34 kg
BASKET (TUMBLER) DIAMETER 44-1/2”
113.03 cm
BASKET (TUMBLER) DEPTH 24-7/8”
63.18 cm
BASKET
(TUMBLER) MOTOR 1 HP*
0.746 kw
DOOR OPENING (DIAMETER) 31-3/8”
79.7 cm
BASKET (TUMBLER) VOLUME 22.4 cu. ft.
0.634 cu. m.
CABINET WIDTH 46-3/16”
117.32 cm
CABINET DEPTH 34”
86.36 cm
CABINET HEIGHT 84-1/4”
214 cm
EXHAUST CONNECTION 10”
25.4 cm
S.A.F.E. WATER CONNECTION** 1/2” M.N.P.T.
DRYERS PER 20’/40’ CONTAINER 8/18
DRYERS PER 48’/53’ TRUCK 25/27
VOLTAGE AVAILABLE 120-240v 1ø, 208-480v 3ø 50/60 Hz
APPROX. WEIGHT
(UNCRATED) 888 lbs
402.8 kg
APPROX. WEIGHT (CRATED) 938 lbs
425.5 kg
HEAT INPUT 204,000 btu/hr
51,408 kcal/hr
AIRFLOW 1,200 cfm
33.98 cmm
INLET PIPE CONNECTION 3/4” F.N.P.T.