Filter
Top Products
14
QUESTIONS AND ANSWERS
Q. What’s the best cycle to use if I have stains on my laundry?
A. Select the STAIN TREAT option pad and HEAVY (see page 4) setting. Pretreat the stains with a laundry
p
re-treat product.
Q. How large of a load can I wash in my washer?
A.
The tub can be loaded completely full with dry, unfolded clothes. However, do not pack the tub tightly. If the load is heavily
soiled it is very important not to overload the washer.
Q. At the end of the cycle my load comes out wetter than normal. What causes this?
A. During tumble and spin the washer may have had difficulty getting to a full spin speed because the load was not evenly
distributed.This can occur with small loads, heavy items or a load in which too much detergent was used, causing
over-sudsing.
Q.
My laundry items seem to be very wrinkled at the end of the cycle. What can I do to correct
the problem?
A. Wrinkling is caused by the combination of heat and pressure. Be sure wrinkle free or permanent press fabrics are washed
on the NO-IRON WEAR cycle, and a cold rinse is used. (See pg. 3 for Wash/Rinse Water Temperatures).
DO NOT
USE FASTER SPIN OR LONGER SPIN OPTIONS
.
Q. My whites are not as white as I’d like. What can I do?
A
.
W
ash white loads using the
C
O
T
T
O
N/STURD
Y
fabric selection. Select the HOT/COLD temperatur
e setting and put
3/4 cup of chlorine bleach in the bleach dispenser.The bleach will be dispensed at the appropriate time in the wash cycle for
optimal performance. A hot water wash temperature of 120 - 140° F (49° - 60° C) is recommended.