Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Maintenance
9001910
14
Monthly
NOTE: Disconnect power to the machine at its
source before performing the monthly maintenance
procedures.
1. Clean the AC drive Box.
a. Remove the AC drive box cover.
b. Blow the fins clean using compressed air at a
pressure of 60-90 psi or by using canned
compressed air. Use care to avoid damaging
cooling fan or other components.
2. Belts.
a. Check belts for uneven wear and frayed
edges.
b. Verify that belts are properly aligned by
checking pulley alignment. Place a
straightedge across both pulley faces. The
straightedge should make contact with the
pulleys in four places.
3. If a machine frequently skips the final spin, check
whether the probe of the out of balance switch is
still in the appropriate position, that is
horizontally centered and vertically 1/3 from the
bottom inside the window (when the drum is
empty). (See electronic repetition system.)
4. Clean drain pipe.
The water still being in the drain needs to be
drained using drain (A) before cleaning the drain
pipe or replacing the exhaust valve. Refer to
Figure 7.
Figure 7
5. Remove back panel and check overflow hose and
drain hose for leaks.
6. Clean inlet hose filter screen:
a. Turn water off and allow valve to cool, if
necessary.
b. Unscrew inlet hose and remove filter screen.
c. Clean with soapy water, rinse and reinstall.
Replace if worn or damaged.
7. Check the supply dispenser hoses for leaks.
8. Use compressed air to clean lint from motor.
9. Clean interior of machine, both basket and shell,
by wiping with a water-soaked sponge or cloth.
10. Use compressed air to ensure that all electrical
components are free of moisture and dust.
11. Verify that insulation is intact on all external
wiring and that all connections are secure. If bare
wire is evident, call a Service Technician.
Yearly
Check if the machine is working properly. If you see
or hear any abnormal function on the machine call a
service technician.
CFD27N
A Drain
A