Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
11
9001910
Operating Instructions
1. Turn on main power source (circuit breaker).
2. Pull the door handle towards you to open the
door. Some models may have a door handle with
a button that must be pressed.
3. Load to capacity whenever possible. DO NOT
OVERLOAD. Refer to Figure 4.
NOTE: Underloading can cause out-of-balance
conditions that can shorten machine life.
Figure 4
4. Close door by pushing door handle towards
machine.
5. The default wash cycle will display.
NOTE: Perm Press Cold is the default cycle for
coin models if none is selected.
Figure 5
6. If desired, select a different cycle at this point or
after satisfying vend. The LED indicator for that
cycle will light.
CFD53N
CFD53N
CHM482R
CHM488R
CHM482R
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
NORMAL
NORMAL
QUICK AS QUICK WASH
HEAVY SOIL
DELICATE
RM RESS
PERM PRESS
HOT
WARM
HOT
HOT
WARM
COLD
WARM
COLD
START
PE P
WH
DOMESTIC MODELS
60C 60C
40C 40C
95C 95C
<
<
30C
CHM488R
INTERNATIONAL MODELS