Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
3
800975
Operating Instructions
5. Set WASH/RINSE temperatures.
There are four WASH/RINSE temperatures
available – HOT Wash/COLD Rinse, WARM Wash/
COLD Rinse, WARM Wash/WARM Rinse, and
COLD Wash/COLD Rinse.
Refer to the Available Water Temperatures section for
the temperature that works best for your garments.
6. Select EXTRA RINSE if desired.
The EXTRA RINSE control is useful for detergent
sensitive skin. By pressing the EXTRA RINSE to ON,
the REGULAR, PERMANENT PRESS, and
DELICATE cycles will each provide an additional
rinse. If the extra rinse is desired, press the switch to
ON. When the extra rinse is not wanted, OFF should
be selected.
7. Select the cycle according to the type of fabric
being washed. Push the timer knob in and turn
clockwise to the desired cycle and wash time.
Use the indicator dot on the knob as a guide.
8. Pull the timer knob out to start the washer. The
DOOR LOCKED light will come on after a short
delay, water fill will begin, and wash drum will
begin tumbling.
NOTE: Washer door MUST be closed tightly to
start washer.
If items need to be added or removed after a cycle has
started, push the timer knob in, wait approximately
45 seconds for DOOR LOCKED light to go out, open
door, add or remove items, adjust the timer knob (if
desired) and pull timer knob out.
There is no agitator on this washer. Instead, the
clothing gently tumbles through the water. The wash
action consists of a period of tumbling in one
direction, a brief pause, and then a reverse tumble in
the opposite direction. The pauses are part of the
tumble action and add to the uniqueness of the washer.
Do not attempt to turn the timer through these pauses;
they are part of the cycle.
CPW162
W547I
Window may be hot in the Hot Wash Cycle.
W326E
CAUTION
FLW831N