Filter
Top Products
6
1/2
1/2
1/3
Label 16
A
B
C
C
40
The out of balance switch is mounted on the solid part of the machine.
There is a window around the probe of the out of balance switch that is mounted
on the movable part of the machine.
When the machine goes out of balance by overloading or uneven distribution of
the linen, the out of balance switch will interrupt this action to prevent damage to
the machine.
Important
Out of balance switch
To guarantee good functioning, the probe should be centered horizontally
and vertically at 1/3 from the bottom of the out of balance window (when
machine drum is empty). (See Label 16)
Window
Probe
To open the door in case of an emergency (deciencies, etc.), remove the lock
cover plate (A). Subsequently, insert a screwdriver from the left-hand side behind
the lock mechanism (B) and push back the black handle (C) while opening the
doorhandle.
Opening the door in
case of an emergency
Important
Before opening the door, be sure there is no water left in the tub and
that the drum has come to a complete stop.