Filter
Top Products
Maintenance
17
F232215
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Figure 11
3. Lubricate bearings and seals each month OR
after every 200 hours of operation. Refer to
Figure 11.
a. Use a premium-grade lithium-based #2
grease. Never mix two types of grease, such
as petroleum and silicone.
b. Pump the grease gun slowly, permitting only
the following number of strokes:
● Bearing grease fitting, 2 strokes
● Seal grease fitting, 1 stroke
IMPORTANT: Do not pump the grease gun until
grease comes out of the bearing housing. This can
result in overlubrication, causing damage to
bearings and seals.
H047I
1 Bearing Grease Fitting
2 Seal Grease Fitting
H047I
1
2